Difference between revisions of "1012 TORADEX"
m (→Preparing microSD card) |
m (→Preparing microSD card) |
||
| Line 17: | Line 17: | ||
=== Updating the 3.10 kernel, V2.4 Toradex version for the Apalis iMX6 === | === Updating the 3.10 kernel, V2.4 Toradex version for the Apalis iMX6 === | ||
| − | ==== | + | ==== Prepare the microSD card ==== |
Attach a microSD card to your host system. The microSD card should be formatted with the FAT32 system and with standard DOS partition. On Linux, this is done with fdisk and mkfs.vfat. Their use is describe elsewhere. The easiest method would be to format the card on a Windows machine first. | Attach a microSD card to your host system. The microSD card should be formatted with the FAT32 system and with standard DOS partition. On Linux, this is done with fdisk and mkfs.vfat. Their use is describe elsewhere. The easiest method would be to format the card on a Windows machine first. | ||
Revision as of 16:32, 31 May 2017
Contents |
Toradex use with Sensoray Model 1012 (and 2255)
The 1012 has been tested with the Toradex Apalis iMX6 board. Toradex provides their own support pages here. This wiki entry provides additional information for updating the kernel to support the Sensoray 1012 device. The instructions also enable the Model 2255 driver for completeness.
The Apalis iMX6 CPU provides PCIe support, needed for the 1012. Toradex also provides a convenient and recommended carrier board called the Ixora to connect the 1012 and provide other peripherals. Sensoray has tested with the iMX6Q and the Ixora V1.0A carrier board running software version V2.4 (3.10 kernel). The instructions here should be valid for future kernel versions.
In order to use the 1012 with the Toradex CPU board, you will need cross-compile a new kernel and driver modules.
Pre-requisites
- user should have some familiarity with kernel development and compilation
- C development tools installed
- git source countrol package installed. On Ubuntu, use "sudo apt-get install git". On Fedora, use "sudo dnf install git"
- microSD card
- Host RS-232 serial port support (or USB dongle), and cable.
- RS-232 adapter for the Ixora board
- microSD card reader for host computer
Updating the 3.10 kernel, V2.4 Toradex version for the Apalis iMX6
Prepare the microSD card
Attach a microSD card to your host system. The microSD card should be formatted with the FAT32 system and with standard DOS partition. On Linux, this is done with fdisk and mkfs.vfat. Their use is describe elsewhere. The easiest method would be to format the card on a Windows machine first.
Follow Step 1 only of the preparation procedure described here and with the additional details below. The commands are listed as bullet points to be entered in a terminal window.
Flashing Linux on IMX6 Modules
- In step 1, download the Apalis iMX6 Linux Image. In our case, we use version 2.4
- Extract the image as superuser
- sudo tar xjvf Apalis_iMX6_LinuxImageV2.4Beta1_20150518.tar.bz2
- Change to the image directory that was extracted
- cd Apalis_iMX6_LinuxImageV2.4
- Find the mount point of the SD card and/or mount the SD card. If unsure, type "dmesg" after plugging in the microSD into card adapter (connected to the PC). The device should be printed in the log. In Fedora and Ubuntu, a popup window usually appears showing the mounted path of the device if clicked. In our case, the microSD is /dev/sdb1. We will mount it at /media/microSD. These instructions below are optional. The important point is to know the mount point. In Fedora, it may be /run/media/user/XYZ where XYZ are random for example.
- sudo mkdir /media/microSD
- sudo umount /dev/sdb1
- sudo mount /dev/sdb1 /media/microSD
- Install the base image to the SD card. This step may take some time
- ./update.sh -o /media/microSD
- Change back to our home directory
- cd ~