Difference between revisions of "GPIO interfacing"
From Sensoray Technical Wiki
(+fast edge rate) |
|||
| Line 1: | Line 1: | ||
| − | Sensoray offers a number of products that have general purpose digital I/O (GPIO) interfaces. When interfacing a GPIO to external circuitry it is important to follow some basic design rules to ensure proper operation and avoid damage to the GPIO and external | + | Sensoray offers a number of products that have general purpose digital I/O (GPIO) interfaces. When interfacing a GPIO to external circuitry it is important to follow some basic design rules to ensure proper operation and avoid damage to the GPIO and external circuitry: |
* '''Input range''' - When the GPIO is acting as an input or wired-OR, make sure the external signal source will never exceed the GPIO's input voltage range. In the case of TTL/CMOS compatible GPIOs (''e.g.'', models [http://www.sensoray.com/products/826.htm 826] and [http://www.sensoray.com/products/2410.htm 2410]), the input range is typically 0 to +5 V. Some products support wider voltage ranges; for example, the [http://www.sensoray.com/products/2610.htm model 2610] input voltage range is 0 to +24 V. | * '''Input range''' - When the GPIO is acting as an input or wired-OR, make sure the external signal source will never exceed the GPIO's input voltage range. In the case of TTL/CMOS compatible GPIOs (''e.g.'', models [http://www.sensoray.com/products/826.htm 826] and [http://www.sensoray.com/products/2410.htm 2410]), the input range is typically 0 to +5 V. Some products support wider voltage ranges; for example, the [http://www.sensoray.com/products/2610.htm model 2610] input voltage range is 0 to +24 V. | ||
Revision as of 12:25, 12 May 2015
Sensoray offers a number of products that have general purpose digital I/O (GPIO) interfaces. When interfacing a GPIO to external circuitry it is important to follow some basic design rules to ensure proper operation and avoid damage to the GPIO and external circuitry:
- Input range - When the GPIO is acting as an input or wired-OR, make sure the external signal source will never exceed the GPIO's input voltage range. In the case of TTL/CMOS compatible GPIOs (e.g., models 826 and 2410), the input range is typically 0 to +5 V. Some products support wider voltage ranges; for example, the model 2610 input voltage range is 0 to +24 V.
- Common ground - If the GPIO is not isolated, the external circuit and GPIO interface must share a common power supply return. For example, in the case of a model 2410, the 2410's power supply return (i.e., negative power supply input) must be connected to the external circuitry's power supply return.
- Edge rate - Strive for fast signal edge rates when a GPIO is driven by an external signal source. Slow rise and fall times can cause sampling errors and, in extreme cases, damage to GPIO line receivers.