Difference between revisions of "1012 NVIDIA TK1"

From Sensoray Technical Wiki
Jump to: navigation, search
(→‎Flashing a modified kernel image)
 
(14 intermediate revisions by one user not shown)
Line 1: Line 1:
 +
== Introduction ==
 
This page will guide you in using the [http://sensoray.com/1012 Sensoray Model 1012] with [https://developer.nvidia.com/linux-tegra-r214 NVIDIA tegra k1 development] boards.
 
This page will guide you in using the [http://sensoray.com/1012 Sensoray Model 1012] with [https://developer.nvidia.com/linux-tegra-r214 NVIDIA tegra k1 development] boards.
  
−
This requires a modified kernel and driver.  
+
A modified kernel is required.
  
 
The modified kernel can be flashed onto the TK1 from the development PC, installed by the TK1 or the modifications can be made by the TK1 and recompiled.  
 
The modified kernel can be flashed onto the TK1 from the development PC, installed by the TK1 or the modifications can be made by the TK1 and recompiled.  
  
−
The driver needs to be modified before being compiled.
+
The driver needs to be compiled with jetson=y.
  
−
=== Flashing a modified kernel image ===
+
== Flashing a modified kernel image ==
  
−
Instructions for flashing a Jetson Tegra K1 to run R21.4 with modifications to work with Sensoray Model 1012
 
−
Required:
 
−
Jetson TK1 and host computer running Linux
 
  
−
Procedure:
+
This method uses pre-compiled images of Sensoray driver 1.1.9 and Linux for Tegra R21.4, improvements in later versions will not be present.
−
1) Get the modified zImage extlinux.conf and tw6869.ko files for Jetson Tegra K1 and put them in Downloads folder
+
−
2) Follow Jetson quick-start guide from NVIDIA
+
  
−
a) quick-start step 1. Download Linux for Tegra package and sample root file system  
+
Get the modified zImage extlinux.conf and tw6869.ko files for Jetson Tegra K1 from Sensoray and put them in Downloads folder
 +
Follow Jetson quick-start guide from NVIDIA
 +
 
 +
quick-start step 1. Download Linux for Tegra package and sample root file system  
  
 
   $  wget http://developer.download.Jetson.com/embedded/L4T/r23_Release_v1.0/Tegra210_Linux_R23.1.1_armhf.tbz2
 
   $  wget http://developer.download.Jetson.com/embedded/L4T/r23_Release_v1.0/Tegra210_Linux_R23.1.1_armhf.tbz2
 
   $  wget http://developer.download.Jetson.com/embedded/L4T/r23_Release_v1.0/Tegra_Linux_Sample-Root-Filesystem_R23.1.1_armhf.tbz2
 
   $  wget http://developer.download.Jetson.com/embedded/L4T/r23_Release_v1.0/Tegra_Linux_Sample-Root-Filesystem_R23.1.1_armhf.tbz2
  
−
b) quick-start step 2. Untar and assemble the rootfs
+
quick-start step 2. Untar and assemble the rootfs
  
 
   $  sudo tar xpf ${RELEASE_NAME}
 
   $  sudo tar xpf ${RELEASE_NAME}
Line 29: Line 28:
 
   $  cd ../
 
   $  cd ../
  
−
3) Modify the kernel to be flashed
+
Modify the kernel to be flashed
  
−
   $ sudo cp ~/Downloads/zImage ~Linux_for_Tegra/zImage
+
  $ cd ~/Linux_for_Tegra/
−
   $ sudo cp ~/Downloads/extlinux.conf ~Linux_for_Tegra/bootloader/ardbeg/jetson-tk1_extlinux.conf.emmc
+
  $ sudo ./applybinaries.sh
 +
 
 +
   $ sudo cp ~/Downloads/zImage ~/Linux_for_Tegra/rootfs/boot/zImage
 +
   $ sudo cp ~/Downloads/extlinux.conf ~/Linux_for_Tegra/rootfs/boot/extlinux/extlinux.conf
  
−
4) Get the driver for Sensoray 1012.
+
Get the driver for Sensoray 1012.
  
 
   $ sudo cp ~/Downloads/tw6869.ko ~/Linux_for_Tegra/rootfs/lib/modules/3.10.40-gdacac96/extra/tw6869.ko
 
   $ sudo cp ~/Downloads/tw6869.ko ~/Linux_for_Tegra/rootfs/lib/modules/3.10.40-gdacac96/extra/tw6869.ko
  
−
5) Flash the TK1 (step 3. in Jetson's quick-start guide)
+
Flash the TK1 (step 3. in Jetson's quick-start guide)
  
−
a) Put your target system into "reset recovery mode" by holding down the RECOVERY button and press RESET button once on the target main board.
+
Put your target system into "reset recovery mode" by holding down the RECOVERY button and press RESET button once on the target main board.
  
−
b) Ensure your Linux host system is connected to the target device through the USB cable for flashing.
+
Ensure your Linux host system is connected to the target device through the USB cable for flashing.
  
 
   $ cd ~/Linux_for_Tegra/
 
   $ cd ~/Linux_for_Tegra/
−
  $ sudo ./applybinaries.sh
 
 
   $ sudo ./flash.sh jetson-tk1 mmcblk0p1  #This will take less than 10 minutes.
 
   $ sudo ./flash.sh jetson-tk1 mmcblk0p1  #This will take less than 10 minutes.
  
−
6) from the TK1 load the Sensoray driver.
+
from the TK1 load the Sensoray driver.
  
 
   $ sudo depmod /lib/modules/3.10.40-gdacac96/extra/tw6869.ko
 
   $ sudo depmod /lib/modules/3.10.40-gdacac96/extra/tw6869.ko
 
   $ sudo insmod /lib/modules/3.10.40-gdacac96/extra/tw6869.ko
 
   $ sudo insmod /lib/modules/3.10.40-gdacac96/extra/tw6869.ko
  
−
8) Restart with Sensoray 1012 attached
+
Restart with Sensoray 1012 attached
  
 
   $ sudo reboot
 
   $ sudo reboot
  
−
7) MPlayer is used by the demo
+
MPlayer is used by the demo
  
 
   $ sudo apt-add-repository universe
 
   $ sudo apt-add-repository universe
Line 64: Line 65:
 
   $ sudo apt-get install mplayer mencoder
 
   $ sudo apt-get install mplayer mencoder
  
−
8) Run the demo
+
Run the demo
  
 
   $ wget http://www.sensoray.com/downloads/sdk_812_linux_1.1.9.zip
 
   $ wget http://www.sensoray.com/downloads/sdk_812_linux_1.1.9.zip
Line 70: Line 71:
 
   password:<not included in this doc>
 
   password:<not included in this doc>
 
   $ ~/sdk_812_1.1.9_linux/demo-sample/PyGTK/demoSX12.py
 
   $ ~/sdk_812_1.1.9_linux/demo-sample/PyGTK/demoSX12.py
 +
 +
== Installing a modified kernel from TK1 ==
 +
 +
This method uses a pre-compiled image of Linux for Tegra R21.4, improvements in later versions will not be present.
 +
 +
Get the modified zImage and extlinux.conf files for nVIDIA Tegra K1 and put them in Downloads folder
 +
 +
Install kernel modifications
 +
 +
  $ sudo cp ~/Downloads/zImage ~/boot/zImage
 +
  $ sudo cp ~/Downloads/extlinux.conf ~/boot/extlinux/extlinux.conf
 +
 +
Get Mplayer for the demo
 +
 +
Add universe repository
 +
 +
  $ sudo gedit /etc/apt/sources.list
 +
 +
Uncomment the universe repository lines
 +
 +
deb http://ports.ubuntu.com/ubuntu-ports / trusty universe
 +
deb-src http://ports.ubuntu.com/ubuntu-ports / trusty universe
 +
deb http://ports.ubuntu.com/ubuntu-ports / trusty-updates universe
 +
deb-src http://ports.ubuntu.com/ubuntu-ports / trusty-updates universe
 +
 +
Save and exit
 +
 +
Install dependencies
 +
 +
  $ sudo apt-get update
 +
  $ sudo apt-get install libasound2-dev zlib1g-dev libxv-dev
 +
 +
Install MPlayer
 +
 +
  $ cd ~/
 +
  $ wget http://mplayerhq.hu/MPlayer/releases/MPlayer-1.2.tar.xz
 +
  $ tar xf ~/Mplayer-1.2.tar.xz
 +
  $ cd ~/Mplayer-1.2
 +
  $ ./configure
 +
  $ make -j4
 +
  $ sudo make install
 +
 +
Get the driver for Sensoray 1012. The listed link is for 1.1.11 there may be a newer version.
 +
 +
Version 1.1.11 from Sensoray
 +
 +
  $ cd ~/
 +
  $ wget http://sensoray.com/downloads/sdk_812_linux_1.1.11.zip
 +
  $ unzip sdk_812_linux_1.1.11.zip
 +
  password: <not included in this doc>
 +
  $ cd /usr/src/linux-headers-3.10.40-gdacac96
 +
  $ sudo make modules_prepare
 +
 +
 +
Load the driver
 +
 +
  $ cd ~/sdk_812_1.1.11_linux/driver/vbuf2
 +
  $ make jetson=y
 +
  $ sudo make install
 +
  $ sudo make load
 +
 +
 +
Restart with the 1012 attached
 +
 +
  $ sudo reboot
 +
 +
Run the demo
 +
 +
  $ cd ~/
 +
  $ ~/sdk_812_1.1.11_linux/demo-sample/PyGTK/demoSX12.py
 +
 +
== Compiling the kernel modifications ==
 +
 +
 +
Get the source of the kernel being used. The link is to R21.4 there may be newer versions
 +
 +
  $ wget http://developer.download.nvidia.com/embedded/L4T/r21_Release_v4.0/source/kernel_src.tbz2
 +
  $ tar xf kernel.src.tbz2
 +
  $ zcat /proc/config.gz > ~/kernel/.config
 +
 +
Add universe repository for dependencies
 +
 +
  $ sudo gedit /etc/apt/sources.list
 +
 +
Uncomment the universe repository lines
 +
 +
deb http://ports.ubuntu.com/ubuntu-ports / trusty universe
 +
deb-src http://ports.ubuntu.com/ubuntu-ports / trusty universe
 +
deb http://ports.ubuntu.com/ubuntu-ports / trusty-updates universe
 +
deb-src http://ports.ubuntu.com/ubuntu-ports / trusty-updates universe
 +
 +
Save and exit
 +
 +
Make changes to the kernel configuration
 +
 +
  $ sudo apt-get update
 +
  $ sudo apt-get install libncurses5-dev
 +
  $ cd ~/kernel
 +
  $ make menuconfig
 +
 +
Set Contiguous Memory Allocation to 64Mb
 +
 +
in menuconfig "y" turns a entry on <enter> goes into sub menus
 +
 +
<esc><esc> gets out of sub menus
 +
 +
"-gdacac96" is the local version of R21.4
 +
 +
  General setup <enter>
 +
  Local version <enter> -gdacac96<enter>
 +
  <esc><esc>
 +
  Device Drivers <enter>
 +
  Generic Driver Options <enter>
 +
  Size in Mega Bytes <enter> 64 <enter>
 +
  <esc><esc>
 +
  <esc><esc>
 +
  <esc><esc>
 +
 +
Save and exit
 +
 +
Increase coherent memory pool
 +
 +
  $ sudo gedit /boot/extlinux/extlinux.cof
 +
 +
Add to the end of the last line
 +
 +
  coherent_pool=32M
 +
 +
Save and exit
 +
 +
Install the changes to the kernel
 +
 +
  $ make -j4
 +
  $ make modules
 +
  $ sudo make modules_install
 +
  $ sudo cp ~/kernel/arch/arm/boot/zImage /boot/zImage
 +
 +
Get Mplayer for the demo
 +
 +
  $ sudo apt-get install libasound2-dev zlib1g-dev libxv-dev
 +
  $ cd ~/
 +
  $ wget http://mplayerhq.hu/MPlayer/releases/MPlayer-1.2.tar.xz
 +
  $ tar xf ~/Mplayer-1.2.tar.xz
 +
  $ cd ~/Mplayer-1.2
 +
  $ ./configure
 +
  $ make -j4
 +
  $ sudo make install
 +
 +
Get the driver for Sensoray 1012. The listed link is for 1.1.11 there may be a newer version.
 +
 +
  $ cd ~/
 +
  $ wget http://sensoray.com/downloads/sdk_812_linux_1.1.11.zip
 +
  $ unzip sdk_812_linux_1.1.11.zip
 +
  password: <not included in this doc>
 +
  $ cd /usr/src/linux-headers-3.10.40-gdacac96
 +
  $ sudo make modules_prepare
 +
 +
Load the driver
 +
 +
  $ make jetson=y
 +
  $ sudo make install
 +
  $ sudo make load
 +
 +
Restart with the 1012 attached
 +
 +
  $ sudo reboot
 +
 +
Run the demo
 +
 +
  $ cd ~/
 +
  $ ~/sdk_812_1.1.11_linux/demo-sample/PyGTK/demoSX12.py
 +
 +
[[Category:1012|Nvidia]]

Latest revision as of 10:58, 4 June 2020

Contents

[edit] Introduction

This page will guide you in using the Sensoray Model 1012 with NVIDIA tegra k1 development boards.

A modified kernel is required.

The modified kernel can be flashed onto the TK1 from the development PC, installed by the TK1 or the modifications can be made by the TK1 and recompiled.

The driver needs to be compiled with jetson=y.

[edit] Flashing a modified kernel image

This method uses pre-compiled images of Sensoray driver 1.1.9 and Linux for Tegra R21.4, improvements in later versions will not be present.

Get the modified zImage extlinux.conf and tw6869.ko files for Jetson Tegra K1 from Sensoray and put them in Downloads folder Follow Jetson quick-start guide from NVIDIA

quick-start step 1. Download Linux for Tegra package and sample root file system 

  $   wget http://developer.download.Jetson.com/embedded/L4T/r23_Release_v1.0/Tegra210_Linux_R23.1.1_armhf.tbz2
  $   wget http://developer.download.Jetson.com/embedded/L4T/r23_Release_v1.0/Tegra_Linux_Sample-Root-Filesystem_R23.1.1_armhf.tbz2

quick-start step 2. Untar and assemble the rootfs 

  $   sudo tar xpf ${RELEASE_NAME}
  $   cd Linux_for_Tegra/rootfs/
  $   sudo tar xpf ../../Tegra_Linux_Sample-Root-Filesystem_R21.4.0_armhf.tbz2
  $   cd ../

Modify the kernel to be flashed 

  $ cd ~/Linux_for_Tegra/	
  $ sudo ./applybinaries.sh

  $ sudo cp ~/Downloads/zImage ~/Linux_for_Tegra/rootfs/boot/zImage
  $ sudo cp ~/Downloads/extlinux.conf ~/Linux_for_Tegra/rootfs/boot/extlinux/extlinux.conf

Get the driver for Sensoray 1012. 

  $ sudo cp ~/Downloads/tw6869.ko ~/Linux_for_Tegra/rootfs/lib/modules/3.10.40-gdacac96/extra/tw6869.ko

Flash the TK1 (step 3. in Jetson's quick-start guide)

Put your target system into "reset recovery mode" by holding down the RECOVERY button and press RESET button once on the target main board.

Ensure your Linux host system is connected to the target device through the USB cable for flashing. 

  $ cd ~/Linux_for_Tegra/	
  $ sudo ./flash.sh jetson-tk1 mmcblk0p1  #This will take less than 10 minutes.

from the TK1 load the Sensoray driver. 

  $ sudo depmod /lib/modules/3.10.40-gdacac96/extra/tw6869.ko
  $ sudo insmod /lib/modules/3.10.40-gdacac96/extra/tw6869.ko

Restart with Sensoray 1012 attached 

  $ sudo reboot

MPlayer is used by the demo 

  $ sudo apt-add-repository universe	
  $ sudo apt-get update
  $ sudo apt-get install libasound2-dev zlib1g-dev libxv-dev
  $ sudo apt-get install mplayer mencoder

Run the demo 

  $ wget http://www.sensoray.com/downloads/sdk_812_linux_1.1.9.zip
  $ unzip sdk_812_linux_1.1.9.zip
  password:<not included in this doc>
  $ ~/sdk_812_1.1.9_linux/demo-sample/PyGTK/demoSX12.py

[edit] Installing a modified kernel from TK1

This method uses a pre-compiled image of Linux for Tegra R21.4, improvements in later versions will not be present.

Get the modified zImage and extlinux.conf files for nVIDIA Tegra K1 and put them in Downloads folder

Install kernel modifications 

  $ sudo cp ~/Downloads/zImage ~/boot/zImage
  $ sudo cp ~/Downloads/extlinux.conf ~/boot/extlinux/extlinux.conf

Get Mplayer for the demo

Add universe repository 

  $ sudo gedit /etc/apt/sources.list

Uncomment the universe repository lines 

deb http://ports.ubuntu.com/ubuntu-ports / trusty universe
deb-src http://ports.ubuntu.com/ubuntu-ports / trusty universe
deb http://ports.ubuntu.com/ubuntu-ports / trusty-updates universe
deb-src http://ports.ubuntu.com/ubuntu-ports / trusty-updates universe

Save and exit

Install dependencies 

  $ sudo apt-get update
  $ sudo apt-get install libasound2-dev zlib1g-dev libxv-dev

Install MPlayer 

  $ cd ~/	
  $ wget http://mplayerhq.hu/MPlayer/releases/MPlayer-1.2.tar.xz
  $ tar xf ~/Mplayer-1.2.tar.xz
  $ cd ~/Mplayer-1.2
  $ ./configure
  $ make -j4
  $ sudo make install

Get the driver for Sensoray 1012. The listed link is for 1.1.11 there may be a newer version.

Version 1.1.11 from Sensoray 

  $ cd ~/
  $ wget http://sensoray.com/downloads/sdk_812_linux_1.1.11.zip
  $ unzip sdk_812_linux_1.1.11.zip
  password: <not included in this doc>
  $ cd /usr/src/linux-headers-3.10.40-gdacac96
  $ sudo make modules_prepare


Load the driver 

  $ cd ~/sdk_812_1.1.11_linux/driver/vbuf2	
  $ make jetson=y
  $ sudo make install
  $ sudo make load


Restart with the 1012 attached 

  $ sudo reboot

Run the demo 

  $ cd ~/
  $ ~/sdk_812_1.1.11_linux/demo-sample/PyGTK/demoSX12.py

[edit] Compiling the kernel modifications

Get the source of the kernel being used. The link is to R21.4 there may be newer versions 

  $ wget http://developer.download.nvidia.com/embedded/L4T/r21_Release_v4.0/source/kernel_src.tbz2
  $ tar xf kernel.src.tbz2
  $ zcat /proc/config.gz > ~/kernel/.config

Add universe repository for dependencies 

  $ sudo gedit /etc/apt/sources.list

Uncomment the universe repository lines 

deb http://ports.ubuntu.com/ubuntu-ports / trusty universe
deb-src http://ports.ubuntu.com/ubuntu-ports / trusty universe
deb http://ports.ubuntu.com/ubuntu-ports / trusty-updates universe
deb-src http://ports.ubuntu.com/ubuntu-ports / trusty-updates universe

Save and exit

Make changes to the kernel configuration 

  $ sudo apt-get update
  $ sudo apt-get install libncurses5-dev
  $ cd ~/kernel
  $ make menuconfig

Set Contiguous Memory Allocation to 64Mb

in menuconfig "y" turns a entry on <enter> goes into sub menus

<esc><esc> gets out of sub menus

"-gdacac96" is the local version of R21.4 

 			General setup <enter>
 				Local version <enter> -gdacac96<enter>
 				<esc><esc>
 			Device Drivers <enter>
 				Generic Driver Options <enter>
 					Size in Mega Bytes <enter> 64 <enter>
 					<esc><esc> 
 				<esc><esc>
 			<esc><esc>

Save and exit

Increase coherent memory pool 

  $ sudo gedit /boot/extlinux/extlinux.cof

Add to the end of the last line 

  coherent_pool=32M

Save and exit

Install the changes to the kernel 

  $ make -j4
  $ make modules
  $ sudo make modules_install
  $ sudo cp ~/kernel/arch/arm/boot/zImage /boot/zImage

Get Mplayer for the demo 

  $ sudo apt-get install libasound2-dev zlib1g-dev libxv-dev
  $ cd ~/
  $ wget http://mplayerhq.hu/MPlayer/releases/MPlayer-1.2.tar.xz
  $ tar xf ~/Mplayer-1.2.tar.xz
  $ cd ~/Mplayer-1.2
  $ ./configure
  $ make -j4
  $ sudo make install

Get the driver for Sensoray 1012. The listed link is for 1.1.11 there may be a newer version. 

  $ cd ~/
  $ wget http://sensoray.com/downloads/sdk_812_linux_1.1.11.zip
  $ unzip sdk_812_linux_1.1.11.zip
  password: <not included in this doc>
  $ cd /usr/src/linux-headers-3.10.40-gdacac96
  $ sudo make modules_prepare

Load the driver 

  $ make jetson=y
  $ sudo make install
  $ sudo make load

Restart with the 1012 attached 

  $ sudo reboot

Run the demo 

 $ cd ~/
 $ ~/sdk_812_1.1.11_linux/demo-sample/PyGTK/demoSX12.py
Retrieved from "https://www.sensoray.com/wiki/index.php?title=1012_NVIDIA_TK1&oldid=1443"
Personal tools
Namespaces

Variants
Actions
Toolbox