Difference between revisions of "GPIO interfacing"
From Sensoray Technical Wiki
(+links) |
|||
| Line 1: | Line 1: | ||
Sensoray offers a number of products that have general purpose digital I/O (GPIO) interfaces. When interfacing a GPIO to external circuitry it is important to follow some basic rules to ensure proper operation and avoid damage to the GPIO and external circuit: | Sensoray offers a number of products that have general purpose digital I/O (GPIO) interfaces. When interfacing a GPIO to external circuitry it is important to follow some basic rules to ensure proper operation and avoid damage to the GPIO and external circuit: | ||
| − | * '''Input range''' - When the GPIO is acting as an input or wired-OR, make sure the external signal source will never exceed the GPIO's input voltage range. In the case of TTL/CMOS compatible GPIOs (''e.g.'', models [http://www.sensoray.com/products/826.htm 826] and [http://www.sensoray.com/products/2410.htm 2410]), | + | * '''Input range''' - When the GPIO is acting as an input or wired-OR, make sure the external signal source will never exceed the GPIO's input voltage range. In the case of TTL/CMOS compatible GPIOs (''e.g.'', models [http://www.sensoray.com/products/826.htm 826] and [http://www.sensoray.com/products/2410.htm 2410]), the input range is typically 0 to +5 V. Some products support wider voltage ranges; for example, the [http://www.sensoray.com/products/2610.htm model 2610] input voltage range is 0 to +24 V. |
* '''Common ground''' - If the GPIO is not isolated, the external circuit and GPIO interface must share a common power supply return. For example, in the case of a [http://www.sensoray.com/products/2410.htm model 2410], the 2410's power supply return (''i.e.'', negative power supply input) must be connected to the external circuitry's power supply return. | * '''Common ground''' - If the GPIO is not isolated, the external circuit and GPIO interface must share a common power supply return. For example, in the case of a [http://www.sensoray.com/products/2410.htm model 2410], the 2410's power supply return (''i.e.'', negative power supply input) must be connected to the external circuitry's power supply return. | ||
Revision as of 12:08, 12 May 2015
Sensoray offers a number of products that have general purpose digital I/O (GPIO) interfaces. When interfacing a GPIO to external circuitry it is important to follow some basic rules to ensure proper operation and avoid damage to the GPIO and external circuit:
- Input range - When the GPIO is acting as an input or wired-OR, make sure the external signal source will never exceed the GPIO's input voltage range. In the case of TTL/CMOS compatible GPIOs (e.g., models 826 and 2410), the input range is typically 0 to +5 V. Some products support wider voltage ranges; for example, the model 2610 input voltage range is 0 to +24 V.
- Common ground - If the GPIO is not isolated, the external circuit and GPIO interface must share a common power supply return. For example, in the case of a model 2410, the 2410's power supply return (i.e., negative power supply input) must be connected to the external circuitry's power supply return.