Difference between revisions of "2601"
From Sensoray Technical Wiki
|
|
| (One intermediate revision by one user not shown) |
| Line 1: |
Line 1: |
| − | Model 2601 is an Ethernet-based communication hub for the 2600 series of I/O modules. It supports up to 16 I/O modules and has 4 serial COM ports.
| + | #REDIRECT [[2600#2601]] |
| − | | + | [[Category:Products]] |
| − | ==Setting the IP address==
| + | |
| − | | + | |
| − | A special utility program, cfg2600.exe, is used to set the 2601's IP address. This utility program requires a command line argument that specifies the COM port on your computer that will be connected to COM4 on the 2601 module (via serial crossover cable).
| + | |
| − | | + | |
| − | The program can be invoked in several ways. For example, suppose you will use the COM1 port on your computer. You could invoke the utility program this way:
| + | |
| − | | + | |
| − | * Create a Windows shortcut to cfg2600.exe
| + | |
| − | * Change the shortcut's target properties to specify the COM1 port (e.g., change "cfg2601.exe" to "cfg2601.exe 1")
| + | |
| − | * Now run the shortcut
| + | |
| − | | + | |
| − | Alternatively, you can run the exe directly from a shell:
| + | |
| − | | + | |
| − | * Open a shell window and change to the directory that contains the exe
| + | |
| − | * Type this command line and hit Enter: "cfg2601 1"
| + | |
| − | | + | |
| − | Or, you can do this:
| + | |
| − | | + | |
| − | * Click Start|Run
| + | |
| − | * Enter the exe path followed by "cfg2601 1", then click OK
| + | |
Latest revision as of 13:05, 19 February 2019
- REDIRECT 2600#2601