48-channel Digital I/O Module | Model 2610

Model 2610 48-channel Digital I/O ModuleView CE compliance report
  • Interfaces 48 general purpose digital I/Os to Ethernet
  • Each channel can function as input, output, or wired-OR
  • PWM output mode
  • Input debounce filters
  • Directly connects to field wiring
  • Integrated support for safety interlocks
  • Selectable operating voltage per channel
  • Connects to Ethernet through 2601
  • DIN-3 rail mountable

Description

Model 2610 is a modular, 48 channel digital I/O interface that connects to Ethernet through a 2601 communication module. It has 48 general-purpose digital I/O channels that can independently serve as inputs, outputs, or in wired-OR mode. It is a member of the 2600 series of smart I/O modules.

All 48 channels support standard, programmed output operation, and 32 channels also support PWM (pulse width modulated) output operation, which is useful for controlling motors, heaters, and similar devices. Input signals are passed through a 10 millisecond debounce filter to prevent errors from electromechanical switch bounce. The physical state of each I/O line is indicated with a LED so that signal states can be quickly determined by visual inspection.

Multiple 2610 modules can be connected to a single 2601

2610_app.jpg

The 2610 can be connected to any of the sixteen IOM (I/O module) ports on a 2601. This is done with a low-cost category-5 patch cable, which supplies communication signals and logic operating power to the 2610. A 2600C1 daisy-chain power cable is also required, to supply I/O power and route interlock signals to the module.

Design assistant

Use the Design Assistant to quickly design a system and calculate pricing.

Field Wiring

Field wiring can be directly connected to the module's 48 RJ-11 sockets — no external termination boards are needed. Each socket provides connections to as many as three I/O channels, making it possible for a field cable to convey up to three active signals through a single socket.

I/O Power and Interlock System

Up to five different I/O voltages can be supplied to the 2610 through its interlock connector. A second, identical interlock connector is provided so that I/O power can be conveniently daisy-chained to other modules, thus eliminating the external wiring and termination boards that would otherwise be required. Each digital output can be configured to use any I/O supply voltage.

A shunt selects each channel's I/O power source

2610_shunts.jpg

The I/O supply voltages may be continuous or, if desired, they may be interruptible by external, series-wired contacts (e.g.,interlock, emergency-stop). If a supply voltage is interrupted due to an open contact, all associated outputs will automatically turn off, independent of software operation.

Interlock example

2610_interlocks.jpg

Specifications

Digital I/Os
Number48
Voltage range+5 to +24 VDC (supplied through interlock connector)
Output typeOpen collector
Output sink current (maximum)100 mA, per channel
2000 mA, all channels total
Input sink current (maximum)600 µA
PWM on/off time2 to 510 ms in 2 ms steps
Input debounce period10 ms
Connector typeRJ-12
Communications
Commands per secondUp to 1000
Power
Input power24 VDC, 120 mA (no output loads)
Mechanical
Module dimensions(W x H x D): 14.25 x 4.93 x 1.87 inches; 362 x 125 x 47.5 mm
DIN rail35 mm DIN rails
Environmental
Operating temperature range20 to 70 °C

Documentation

FileVersionDate M-D-YTypeSize
Manuals
2600 Hardware Manual2.0.210-24-19PDF489 KB
2600 Programming Guide1.12.010-24-19PDF232 KB
Application Notes
Tech support wiki for 2600 familyHTML
Mechanical Drawings
Module Dimensions and Layout1.0.010-24-19PDF31 KB
Compliance
CE Test Report10-24-19PDF817 KB

Downloads

FileVersionDate M-D-YTypeSize
2600 Software Development Kit
For Linux and Windows
1.1.1812-01-23ZIP2.04 MB
2600 Labview Drivers1.0.010-24-19ZIP542 KB
Other Operating Systems
Need a software development kit for another operating system? We can port our SDK to your OS
for a NRE fee or, with a volume commitment, at no additional cost. Contact Sales for details.

Pricing & Ordering

Model Description Qty 1 Qty 2-9 Order Qty.
Modules
261048-channel Digital I/O Module$367$334
2601I/O Communication Module$576$523
Power Supplies
20424 V 120 Watt power supply$160$160
Cables
2600C1Cable, daisy chain power, for 2600 series$18$18
2601C1Cable, Category 5e patch, 3 ft$13$13
26C50Cable, Category 5e patch, 50 ftCallCall 
26C100Cable, Category 5e patch, 100 ftCallCall 

Design assistant

Use the Design Assistant to quickly design a system and calculate pricing.

SENSORAY | 7313 SW Tech Center Dr. | Tigard, OR 97223 | 503.684.8005 | Email Us

CONTACT SENSORAY

Employment | Privacy Policy | Press Releases | Copyright © 1982-2024 Sensoray ~ All Rights Reserved